| RON Crane Scales, Dynamometers, Load Cell Scales and Overload
Detectors, include the low headroom RON 1000 Hook Type Overload
Detector which is designed to be installed directly between the hoist
and its trolley.
RON
1000 is a low headroom, electromechanical Overload Detector. It may be
configured to trigger any desired electrical alarm supplied by the
customer including stopping the lift, for overload detection and
prevention when an unsafe overload condition occurs.
Overload
during lifting: Hoist or crane overload is dangerous and can cause
accidents. Overload detection is important for prevention of crane
overload.
The devices are supplied factory-calibrated and ready
for installation. Available in a wide variety of capacities, the RON
1000 can be supplied in capacities ranging from 500 lbs (250 kgs) to
20,000 lbs (10,000 kgs). Each unit is initially adjusted to give the
user an overload indication at 105% of rated capacity. Additional
detection point is optional.
RON Crane Scales, Dynamometers,
Overload Detectors, digital Load Cell scales and load scales are
factory-tested and supplied with a test certificate, including a fully
traceable calibration chart.
RON 1000 overload detectors are factory-adjusted and supplied with a test certificate, including a proof load certificate.
|
|
| Specifications |
Options |
Safety Factor: 5:1. Each system proof- loaded to 200% of capacity (certified).
Switching Nature: Normally open and/or normally closed.
Rating: 0.5A @ 50 VDC, 0.5A @ 125 VAC.
Life Expectancy: Electrical: over 1 million operations.
Mechanical: over 5 million operations.
|
|
Approved by: UL, CSA, Semko VDE.
Environment: Weatherproof, NEMA 4, IP 65 .
Temperature Range: -4°F to +175°F (-20°C to + 80°C).
Cable Length: 9.5' (3m).
Material: High strength, low alloy steel
|
|
Wiring
Options:
- Additional detection point
- Fatigue rated structure
|
| RON 1000 - H |
 |
|
| 15.08.07 |
|
