| RON portable digital scales include the Crane Scale, Dynamometer Load Cell and Overload Detector series.
The
low headroom RON 1000 Standard Type Overload Detector is designed to be
installed on the dead end or can be used between the hoist and its
trolley.
RON 1000 Standard Type is a low headroom,
electromechanical Overload Detector, used for overload monitoring. It
may be configured to trigger any desired electrical alarm supplied by
the customer, including stopping the lift when an unsafe overload
condition occurs, for overload detection and prevention.
Overload
during lifting: Hoist or crane overload is dangerous and can cause
accidents. Overload monitoring is important for prevention of crane
overload.
The devices are supplied factory-calibrated and ready
for installation. Available in a wide variety of capacities, the RON
1000 can be supplied in capacities ranging from 500 lbs (250 kgs) to
20,000 lbs (10,000 kgs). Each unit is initially adjusted to give the
user an overload indication at 105% of rated capacity. Additional
detection point is optional.
RON 1000 overload detectors are factory-adjusted and supplied with a test certificate, including a proof load certificate.
|
|
| Specifications |
Options |
Safety Factor: 5:1. Each system proof-loaded to 200% of capacity (certified).
Switching Nature: Normally open and/or normally closed.
Rating: 0.5A @ 50 VDC, 0.5A @ 125 VAC.
Life Expectancy: Electrical: over 1 million operations. Mechanical: over 5 million operations.
|
|
Approved by: UL, CSA, Semko VDE.
Environment: Weatherproof, NEMA 4, IP 65.
Temperature Range: -4°F to +175°F (-20°C to + 80°C).
Cable Length: 9.5' (3m).
Material: High strength, low alloy steel
|
|
Wiring
Options:
- Additional detection point
- Fatigue rated structure
|
| RON 1000 - S |
 |
|
| 15.08.07 |
|
