Safety Factor: Designed to 5:1, for the load cell and the lifting eye. Average
straightening load of the hook is at least 4 times the capacity.
Proof Load: Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t.
Accuracy: ± 0.1% of full range.
Durability Robust, extruded aluminum housing, iridized and polyurethane coated.
Display: 5 digit, 2" (50mm) liquid crystal display and annunciator; two-level
overload state, max. value (peak hold), low battery, tare state (gross
or net), measuring units, sleep state, charge, and programming
instructions. Standard number of measurements per second: 1.
Functions: Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload
visual alarms. User calibration. Sleep mode after 60 sec. in zero
value, awakes automatically when loaded. |
|
Units: available in the following
measurement readings: metric tons, short tons (2000 lbs), kgs, lbs,
newtons, deca newtons, k. newtons.
Load Cell Material: Made of high-strength, aerospace quality, alloy steel, polyurethane coated.
Power: 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries
rated 3AH will function for at least 2000 hours (at last three months
of continuous working). Occasional use will extend the life of the
batteries up to several years. Adding certain options will shorten the
life of the batteries. All settings retained at power off.
Calibration: User calibration. Initial factory calibration, fully traceable (certified).
Temperature Range: -15°F to +175°F (-25°C to +80°C).
Environmental: Weather proof, NEMA 4, IP65. |
|
- 1 or 2 user-adjustable set points
- Additional 2"/50mm LCD display with cable connection to indicator
- Additional 4"/100mm LED display with cable connection to indicator
- Analog output: 0 to 1V/0 to 2V/0 to 3V
- Analog output: 4 to 20 mA
- Baud rate, user-selectable
- Dampened (average) display for unstable load
- Data logger – up to 600 measurements
- Data logger – up to 3000 measurements
- Data logger – up to 6000 measurements
- Double, back-to-back displays
- Fatigue rated load cell
- Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set
- Real-time clock
- Rechargeable batteries with an external charger for charging the
batteries inside the system
- RS-232 - continuous or on demand
data output, user-selectable
- RS-485 - continuous or on demand
data output, user-selectable
- Swirel hook (cap. 2.5t-10t)
- Totalizer
- Units, user-selectable
- Wireless (R.F.) data transmission
|
