These shackles have higher working load limits than specified by Federal Specifications.

• All shackle pins are forged from alloy steel, heat treated and tempered to give greater strength.

• All shackles are marked with size (inches and millimeters) and working load limit in tons.

• Ultimate strength equals 6 times working load limit. Proof load equals 2.2 times working load limit.

• All bolt, nut & cotter shackles have thread protected ends.

• When ordering, specify galvanized (G) or painted (P).

• Galvanized per ASTM A153.

• Painted shackles are orange.

• Ton = 2,000 lbs. (3/16" – 2"), 2,200 lbs. (21/2" – 31/2").

• Standard industry tolerances apply.

• Built-in Distortion Detectors (3/16" – 2").